Hervorragend für Trockenbohrungen mit Verrohrungsdrehtisch
Bohrgerät B 75 geo pro
Diese kraftvolle, kompakte 8 t Maschine mit hoher Rückzugkraft eignet sich hervorragend für Trockenbohrungen mit Verrohrungsdrehtisch. Die schnelle Umrüstung vom Trockenbohren mit Verrohrungsdrehtisch auf Saugbohren oder Spülbohren macht sie zugleich flexibel. Dabei erreicht das Profi-Geo-Bohrgerät im Saugbohrverfahren eine Teufe von 30 m bei einem Durchmesser von bis zu 600 mm.
Teilen Sie uns mit, was Sie mit unseren Bohrgeräten vorhaben. Wir liefern Ihnen das passende Gerät mit der speziell dafür vorgesehenen Ausrüstung. Setzen Sie sich mit uns in Verbindung und wir machen Ihnen ein individuelles Angebot!
Downloads
Application
- Diese kraftvolle, kompakte 8 t Maschine eignet sich hervorragend für Trockenbohrungen mit Verrohrungsdrehtisch.
Advantages
- kraftvolle, kompakte 8 t Maschine
- schnelle Umrüstung vom Trockenbohren mit Verrohrungsdrehtisch auf Saugbohren oder Spülbohren
- hervorragend für Trockenbohrungen mit Verrohrungsdrehtisch bis Ø 324 mm
- Saugbohren bis zu Ø 600 mm möglich
Bohrverfahren und Einsatzgebiete
| Saugbohren * | Teufe 30 m | Durchmesser 600 mm |
| Verrohrtes Bohren mit Verrohrungstisch | Teufe 25 m | Durchmesser 324 mm |
| Spülbohrung * | Teufe: 150 m | Durchmesser: 200 mm |
| Imlochhammer-Bohrung * | Teufe 100 m | Durchmesser 155 mm |
| Trockenbohrung * | Teufe 35 m | Durchmesser 219 mm |
| Hohlbohrschneckenverfahren * | Teufe 15 m | Durchmesser 180 mm |
Technical specifications
| Antriebsaggregat (Deutz-Motor) | 4 Zyl. / 55 kW / 75 PS Diesel (Emissionsstufe 5) |
| Tankinhalt | 45 l |
| ADLER-Raupenfahrwerk F 75 | Breite: 1.300 mm – 1.700 mm (teleskopierbar) |
| Support feet | 4 x hydraulic |
| Drill pipes | 2 m |
| Feed length | 3 m |
| Feed | 15 kN |
| Retraction force | 50 kN |
| Mastabsenkung 1.000 mm | serienmäßig |
| Feedsystem | über Hydraulikzylinder |
| Bohrantrieb | hydraulisch verschiebbar |
| hydraulischer Bohrkopf mit Getriebe (2-stufig), Durchgang 4“ Getriebe (3-stufig), elektrisch schaltbar | 1. Gang: 490 daNm / 40 U/min 2. Gang: 254 daNm / 80 U/min 3. Gang: 123 daNm / 160 U/min andere Drehzahlen und Drehmomente möglich |
| Saugpumpe | 160 m3/h, Durchgang 4“ |
| Verrohrungsdrehtisch Durchgang / Hubkraft / Hub | bis Ø 335 mm / 220 daNm / 500 mm |
| Hubspannschelle Durchgang / Hubkraft / Hub | bis Ø 219 mm / 120 kN / 200 mm |
| Offset drilling | optional |
| Seilwinde hydraulisch Zugkraft / Seillänge / Ø Seil | 36 kN / 35 m / 12 mm |
| Mast extension | optional |
| Kabelfernsteuerung für Fahrantrieb | serienmäßig |
| Kabelfernsteuerung für Fahren und Bohren | optional |
| Transport dimensions L / B / H | 6.023 / 1.300 / 2.733 mm (mit Schutzeinrichtung) |
| Weight of basic machine | ab 6,5 t |
Drill rig B 75 geo pro
Get more information
Sie interessieren sich für das Bohrgerät B 75 geo pro? Füllen Sie bitte das Formular aus, so dass wir oder unsere Vertriebspartner Ihnen mehr Informationen zukommen lassen können!
Related products
- Crawler Undercarriage F-Series
Crawler Undercarriage F-Series
With the ADLER Crawler Undercarriage F-Series, you can access hard-to-reach places such as backyards and fenced gardens, even in difficult terrain.
- Drill rig B 15
Drill rig B 15
Compact drilling rig for near-surface depths, light to medium-heavy soils. Optionally with integrated flushing pump as a well drilling device.
- Augers E-Series
Augers E-Series
E-Series – the auger range for every carrier vehicle. Powerful performance on light or medium soils. Get our heavy duty blades and heads for heavy soils.
ADLER SmartBox
Wireless remote control from your smartphone
Connected wirelessly…
With the ADLER SmartBox, you can conveniently control your electrical functions via Bluetooth using the ADLER app.
You can remotely control up to four consumers using the ADLER app. For example the water spray device on your sweeper, the hydraulic side pivoting on your snow blade or Rotation speed and spread rate for your salt spreader. The functions can be configured in the app according to your requirements.
Also for remote control of third-party products!
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Downloads
Advantages
- Easy control of all implements via Bluetooth – also possible for products of other manufacturers
- Saving of costs and time, because the laying of control cables is omitted
- Damaged cables will no longer be a problem!
- Easy programming of all functions in the pre-installed app
- ADLER-SmartBox including Smartphone and ADLER-App for control via Bluetooth
- (on option, also without Smartphone)
- Up to four users can be connected in a SmartBox.
- In the App all functions can be configured according to your requirements.
- All users can be controlled as a switch-, feeler- or with time function.
- 12- or 24 V feed pipe required
ADLER SmartBox
Get more information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related products
- Salt Spreader ST-E
Salt Spreader ST-E
The ST-E electric salt spreader with a 12-volt gear motor is equipped with a 120 or 200 liter plastic storage container and a stable frame. Rotational speed and quantity application can be conveniently controlled from the driver’s seat.
- Snow Blade S-Series
Snow Blade S-Series
With the ADLER snow plow of the S series you are well prepared for winter service – for many years. The material and construction guarantee excellent clearing results even under the toughest weather conditions.
- Sweeper K 950
Sweeper K 950
The ADLER K 950 is one of the largest sweepers in Europe. The sweeping tank has a volume of up to 1,425 liters. The brush diameter is up to one meter. It is used wherever size is important, for example in quarries.
Weed Brush HW 5.5 3-D
Say goodbye to those pesky weeds!
Die ADLER-Wildkrautbürste HW 5.5 3-D ermöglicht Ihnen eine bequeme rein mechanische Unkrautbeseitigung – ohne Chemie. Daher ist sie ideal für die Wildkrautbekämpfung im Garten- und Landschaftsbau, in der Landwirtschaft, im kommunalen und dienstleistenden Einsatz. Auch im privaten Umfeld erledigt sie ihre Aufgaben hervorragend.
With the special weed brush, you can effectively combat overgrown grass, moss and weeds on paths, surfaces and in gutters.
In the construction, Bowden cables were largely dispensed with and a high-quality linkage control was used.
The powder coating, the stable workmanship and the low-maintenance hydraulic drive ensure a long service life for the sweeper.
Downloads
Benefits
- Conveniently adjustable 3-D brush head
- Unkrautbeseitigung ohne Chemie
- Ideal for horticulture, agriculture and municipal use
- Environmentally friendly cleaning of paths and surfaces without pesticides
- Hydraulically driven Weed Brush for convenient weed clearing
- Clockwise / anti-clockwise sweeping as a standard feature
Accessories
- Steel wire rope (plaited) – excellent for surfaces with dense weed growth
- Flat wire brush – eminently suitable for removing mosses and smaller weeds
- Universal brush (flat wire/wave-wire) – ecommended as standard for most places
- Radial sweeper – effective for heavy and stubborn dirt with a working width of 70 cm
- Adjustable protective guard – against flying fragments, like dirt and little stones
Technical specifications
| ADLER-Weed Brush HW 5.5 3-D | |
| Brush diameter | 60 – 70 cm depending on bristles |
| Brush drive | hydraulic |
| Brush adjustment | via spindle with crank lever |
| Direction of brush rotation | rotates in both directions |
| Drive motor | Honda GCV 160, 5.5 hp (4.0 kW) |
| Wheels | 480/4.00-8 tyres |
| Finish | powder coating |
| Weight (kg) | 98 |
Weed Brush HW 5.5 3-D
Get more information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related products
- Weed Brush Attachment W-series
Weed Brush Attachment W-series
The mounted weed brush quickly puts an end to weeds and wild herbs on paved areas and paths in municipalities and building yards.
- ADLER-Heater 500 / 750 E
ADLER-Heater 500 / 750 E
Walk-behind thermal weed control without poison, chemicals or noise. ADLER Heater eliminates weeds with infrared radiation.
- Walk-behind Sweeper HU 6.5 + HK 5.5 + HK 6.5
Walk-behind Sweeper HU 6.5 + HK 5.5 + HK 6.5
Over the years, this sweeper has also proven itself to be a great help in winter: smaller amounts of snow can be quickly cleared with a snow brush whereas the easy-to-attach snow blade allows you to eliminate larger amounts of snow as well.
When you need to quickly remove weeds from large areas
Weed Brush Attachment W-series
• High-performance, hydraulically driven weed brush with brush 800 mm in diameter • Perfect for clearing large areas of weeds quickly • Universal attachment for all standard carrier vehicles • Available as a basic or professional machine with many hydraulic functions and radio remote control
Quickly remove weeds from large areas
Thanks to the large brush diameter, the hydraulic swivel arm and the various adjustment options, paved areas in particular can be quickly cleared of weeds.
Depending on the sensitivity of the floor covering and the type of wild herbs, you can choose between different brush variants:
- flat wire (ideal for mosses)
- Wire braids (ideal for dense vegetation and stubborn weeds)
- large radial broom for “cleaning up afterwards”
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Downloads
Advantages
- Powerful, hydraulically driven
- Weed brush with a diameter of 800 mm
- As a basic device or professional machine with
- many hydraulic functions and
- Radio remote control available
- The ADLER weed brush packs a punch:
- Large areas are quickly depleted
- free of wild herbs.
- Universal mounting for all common
- carrier vehicles
Accessories
- Hydraulically adjustable swivel range
- Hydraulically adjustable longitudinal and lateral inclination
- 8-channel radio remote control 12 or 24 volts for fully hydraulic use of weed brush
- Height-adjustable support wheel 200 mm x 80 mm
- ¾” flow-control valve for hydraulic flow rates > 75 l/min.
- Various brush attachments
Technical specifications
Equipment variants
based on the hydraulic connections available on the carrier vehicle
| 1 x double-acting (snap-in function recommended) | 2 x double-acting | 1 x double-acting + electric switch valve 12 V | 4 x double-acting or 1 x double-acting with radio remote control |
 | | | |
| X |  | | |
| X | X | X |  |
| X | X | X |  |
Weed Brush Attachment W-series
Get more Information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related Products
- ADLER Heater 1000/1400
ADLER Heater 1000/1400
Large-scale thermal weed control for roads, paved or water-bound surfaces. ADLER Heaters fit all standard carrier vehicles.
- ADLER-Heater 500 / 750 E
ADLER-Heater 500 / 750 E
Walk-behind thermal weed control without poison, chemicals or noise. ADLER Heater eliminates weeds with infrared radiation.
Infrared heater for weed control as a mounted device
ADLER Heater 1000/1400
The holistic programme for paved areas, pavements, water-bound paths, cemetery maintenance and much more.
With the ADLER Infrared Heater you can destroy weeds in an environmentally friendly and non-toxic way.
How it works:
When an infrared heater is used as an attachment, infrared rays hit the weeds. This causes the protein-containing plant cells to burst. The plants wither within 2 to 3 days. Regular cultivation of the area and the associated destruction of the seeds over a large area significantly reduces the wild weeds and the regrowth is sustainably reduced. At the same time, this method is much gentler than conventional flaming devices.
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Downloads
Advantages
- Environmentally friendly weed destruction by infrared rays.
- ADLER plug-and-play principle hardly any set-up times.
- Efficient and inexpensive gas
- Temperatures of approx. 800 – 900 °C no other media required for weed control (such as water, foam additives, etc.)
- High-quality ceramic plates are used to generate the infrared radiation.
- Thermal weed control with infrared rays is effective against both wild weeds and their seeds
- Low gas consumption almost noiseless and very energy efficient
- No open flame Devices can be used in many ways and on almost any surface right up to the edge
- Infrared weed control is non-toxic and environmentally friendly
- Destroys root system and seeds Regrowth is reduced
- No herbicides ideal for surfaces, roads and water-bound paths
application
Holistic weed control for paved surfaces, sidewalks, water-bound paths, cemetery care… With the ADLER infrared heater you destroy weeds in a non-toxic and environmentally friendly way. No open flame! The devices can be used in a variety of ways and on almost any surface up to the edge.
Technical specifications
| Type | ADLER Heater 1000 | ADLER Heater 1400 | |
| Working width | mm | 1.050 | 1.400 |
| Dimensions (without mount) | mm | L 1.600 x B 1.127 | L 1.600 x B 1.462 |
| Number of infrared emitters | 6 | 8 | |
| Radiated surface | mm | L 740 x B 1.039 | L 740 x B 1.381 |
| Weight (without gas or mount) | kg | ca. 370 | ca. 490 |
| Ignition | elektr. per Funkfernbedienung | elektr. per Funkfernbedienung | |
| Connections required Hydraulic | 1 x double-acting (for hydr. side shift) | 1 x double-acting (for hydr. side shift) | |
| Connections required Electrical | 12 volt (1 x attachment device) | 12 volt (1 x attachment device) | |
| Infrared emitter fuel | LPG autogas | LPG autogas | |
| Gas consumption | kg | about 6 | about 8 |
| Coverage per gas filling | h | 85l-Tank: app. 5 120l-Tank: app. 8 | 150l-Tank: app. 8 |
| Working speed | km/h | up to 3 | up to 3 |
| Noise exposure (without vehicle) | dB | ||
| Area performance per hour | m² | 2,000 – 3,000 | 2,800 – 4,200 |
Note on gas installations
The gas systems of devices for thermal weed control must be checked regularly to ensure safe operation of the system.
The inspection of these systems must be carried out by a “person qualified to inspect” and is carried out in accordance with the requirements of the accident prevention regulation “Use of liquid gas” (DGUV 79)
The inspection interval for the ADLER Heater gas systems is 2 years.
ADLER Arbeitsmaschinen GmbH & Co. KG carries out the initial inspection in cooperation with Westfalen AG.
We also recommend Westfalen AG for the upcoming recurring inspections, as they have technicians and service partners working throughout Germany.
Westfalen AG
Industrieweg 43
48155 Münster
Germany
+49 251 695-539
Fax: +49 251 695-73539
technischer-kundenservice@westfalen.com
Under the following link you will also find an online database of other inspectors for liquid gas systems (in German):
ADLER Heater 1000/1400
Get more information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related products
- ADLER-Heater 500 / 750 E
ADLER-Heater 500 / 750 E
Walk-behind thermal weed control without poison, chemicals or noise. ADLER Heater eliminates weeds with infrared radiation.
- Sweeper K 600
Sweeper K 600
As a multifunctional sweeper, the K600 offers a large filling volume for an excellent cleaning result. The K600 can be retrofitted at any time with a scraper device, a water spray device or a side sweeping broom.
Handheld infrared weed burner
ADLER-Heater 500 / 750 E
Thermal weed control methods can be used on practically all surfaces and always work according to the same principle. The application of thermal energy to the surface of the plants destroys the cell structure of the vegetative fibre.
The water which is transported from the root to the leaf cells evaporates and makes the plant dry up after a short time already. Furthermore, proteins are denatured whereby vital processes such as photosynthesis are being interrupted. As a result the damaged plant material dies. The ADLER Heaters use sophisticated infrared technology and offer a number of advantages compared to other methods.
Clear restriction of operating area No noise exposure Low gas consumption Extremely short set-up times
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Downloads
Advantages
- Environmentally friendly weed control without chemicals.
- ADLER plug-and-play principle hardly any set-up times.
- Efficient and inexpensive gas Use of commercially available 11 kg propane gas cylinders
- Temperatures of approx. 800 – 900 °C no other media required for weed control (such as water, foam additives, etc.)
- High-quality ceramic plates are used to generate the infrared radiation.
- Thermal weed control with infrared rays is effective against both wild weeds and their seeds
- Low gas consumption almost noiseless and very energy efficient
- No open flame Devices can be used in many ways and on almost any surface right up to the edge
- Infrared weed control is non-toxic and environmentally friendly
- Destroys root system and seeds Regrowth is reduced
- No herbicides ideal for surfaces, roads and water-bound paths
Application
Holistic weed control for paved areas, sidewalks, water-bound paths, cemetery maintenance. With the ADLER infrared heater you can destroy weeds in a non-toxic and environmentally friendly way. No open flame! The devices can be used in a variety of ways and on almost any surface up to the edge.
Technical specifications
| Model | ADLER-Heater 500 E | ADLER-Heater 750 E | |
| Working width | mm | 500 | 750 |
| Basic device dimensions | mm | L 1.495 x B 532 x H 829 | L 1.495 x B 703 x H 829 |
| Number of infrared emitters | 3 | 4 | |
| Weight (without gas cylinder or hand-held burner) | kg | 108 | 128 |
| Ignition | electrical | electrical | |
| Drive | electrical | electrical | |
| Battery power supply | Ah | 17 | 17 |
| Battery capacity | h | 2 – 5 | 2 – 4 |
| Infrared emitter fuel | 11 kg-propane gas cylinder | 11 kg-propane gas cylinder | |
| Gas consumption | kg | up to 2.3 | up to 3.0 |
| Capacity per gas cylinder | h | app. 5 | app. 3.5 |
| Working speed | km/h | up to 2 | up to 2 |
| Noise exposure | dB | ||
| Area performance per hour | m² | up to 1.000 | up to 1.500 |
| Overall cost/m € including 4-year depreciation 5 hours/day 100 days/year | € | 0,02 | 0,02 |
Note on gas installations
The gas systems of devices for thermal weed control must be checked regularly to ensure safe operation of the system.
The inspection of these systems must be carried out by a “person qualified to inspect” and is carried out in accordance with the requirements of the accident prevention regulation “Use of liquid gas” (DGUV 79)
The inspection interval for the ADLER Heater gas systems is 2 years.
ADLER Arbeitsmaschinen GmbH & Co. KG carries out the initial inspection in cooperation with Westfalen AG.
We also recommend Westfalen AG for the upcoming recurring inspections, as they have technicians and service partners working throughout Germany.
Westfalen AG
Industrieweg 43
48155 Münster
Germany
+49 251 695-539
Fax: +49 251 695-73539
technischer-kundenservice@westfalen.com
Under the following link you will also find an online database of other inspectors for liquid gas systems (in German):
ADLER-Heater 500 / 750 E
Get more information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related products
- ADLER Heater 1000/1400
ADLER Heater 1000/1400
Large-scale thermal weed control for roads, paved or water-bound surfaces. ADLER Heaters fit all standard carrier vehicles.
- Walk-behind Sweeper HU 6.5 + HK 5.5 + HK 6.5
Walk-behind Sweeper HU 6.5 + HK 5.5 + HK 6.5
Over the years, this sweeper has also proven itself to be a great help in winter: smaller amounts of snow can be quickly cleared with a snow brush whereas the easy-to-attach snow blade allows you to eliminate larger amounts of snow as well.
We don’t like
gridlocked situations!
The stable and long-life ADLER Crawler Undercarriages are the ideal solution and advantageous where wheels can squeeze or damage the ground surface because of punctual pressure. These caterpillar tracks allow for high stability and maneuverability in diverse applications: No matter what you mount on the track undercarriage – a drill rig, a lifting platform, a crane or a harvester – the extendable ADLER Crawler Undercarriages make your machine a flexible off-roader.
Advantages
- Perfectly suitable for industrial, agricultural and construction machinery
- Choose between a rigid or an extendable undercarriage incl. hydraulic telescoping
- Very robust design
- Two speed levels
- Standard equipment includes four lashing points
- On option, customer-specific adaptations possible
Downloads
Technical specifications
| Crawler Undercarriage F-series | F 17 | F25 | F30 | F35 | F45 | |
| Load capacity incl. undercarriage | kg | 1.700 | 2.500 | 3.000 | 3.500 | 4.500 |
| Load capacity excl. undercarriage | kg | 1.380 | 2.110 | 2.570 | 2.780 | 3.660 |
| Weight | kg | 320 | 390 | 430 | 720 | 840 |
| Length | mm | 1.344 | 1.446 | 1.699 | 1.728 | 1.903 |
| Min. width | mm | 725 | 775 | 780 | 835 | 1.000 |
| Max. width | mm | 1.125 | 1.175 | 1.180 | 1.235 | 1.400 |
| Height | mm | 336 | 336 | 336 | 418 | 418 |
| Speed | km/h | 2,9 | 2,9/5,2 | 2,9/5,2 | 2,9/5,2 | 2,9/5,2 |
| Max. oil flow per motor | l/min | 20 | 20 | 20 | 35 | 35 |
| Max. torque value per motor | Nm | 1.443 | 1.607 | 1.607 | 3.317/1.864 | 3.317/1.864 |
| Max. pressure | bar | 200 | 200 | 200 | 200 | 200 |
Crawler Undercarriage F-Series
Get more information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related products
- ADLER SmartBox
ADLER SmartBox
With the ADLER SmartBox, you can conveniently control electrical functions via Bluetooth using the ADLER app.
You can remotely control up to four consumers via the ADLER app. - Drill rig B 50
Drill rig B 50
Drilling rig from ADLER, powerful, easy to transport. Many possible uses and options. Ideal for drilling to a depth of 100 m.
- ADLER PowerPack
ADLER PowerPack
As a multifunctional sweeper, the K600 offers a large filling volume for excellent cleaning results. The K600 can be retrofitted at any time with a scraping device, a water spray device or a side broom.
Turn your excavator from 1.5 to 30 t into a drilling rig
Attachment drill mast ABL
The B-Series drill units are characterized by a variety of accessoriesand implements. The attachment drill mast (ABL) from ADLER was specially designed for attachment to the excavator and makes it fast and uncomplicatedly a cost effective drill unit.
The construction according to the modular principle allows us to create from a basic device and by the various add-on modules a customized drill unit. Depending on the local conditions and drilling requirements, we can thus configure the optimal solution for our customers.
This ensures a high degree of flexibility and a multitude of possible uses for individual production and high efficiency.
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Downloads
Advantages
- for excavators from 1.5 t to 30 t.
- We manufacture according to your wishes!
- big variety
- fast adaptation
- individual adaptation
- down to 150 m!
Technical specifications
Technical data on request
Attachment drill mast ABL
Get more information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related products
- Crawler Undercarriage F-Series
Crawler Undercarriage F-Series
With the ADLER Crawler Undercarriage F-Series, you can access hard-to-reach places such as backyards and fenced gardens, even in difficult terrain.
- Drill rig B 50
Drill rig B 50
Drilling rig from ADLER, powerful, easy to transport. Many possible uses and options. Ideal for drilling to a depth of 100 m.
- Sweeper K 750
Sweeper K 750
The K750 sweeper is designed for the toughest applications when working in the countryside. The 750 mm sweeping roller diameter ensures particularly thorough cleaning even on uneven surfaces thanks to powerful drive. The machine can be mounted ex works on all common carrier vehicles.
Excellent for dry drilling with piping turntable
Drill rig B 75 geo pro
This powerful, compact 8 ton machine is ideal for dry drilling with piping turntable. The quick changeover from dry drilling with a casing rotary table to suction drilling or flush drilling makes it flexible at the same time. Using the suction drilling method, it reaches a depth of 30 m with a diameter of up to 600 mm.
Let us know what you intend to do with our drilling rigs. We will provide you with the right device with specially designed equipment. Get in touch with us and we will make you an individual offer!
Downloads
Application
- dry drilling
- suction drilling
- flush drilling
Advantages
- powerful, compact 8 t machine
- fast conversion from dry drilling with piping turntable to suction drilling or flush drilling
- excellent for dry drilling with piping turntable up to 324 mm diameter
- suction drilling up to 600 mm possible
Characteristics of B 75 geo pro
| Suction drilling * | Depth: 30 m | Diameter: 600 mm |
| Piped drilling with piping turntable | Depth: 25 m | Diameter: 324 mm |
| Flush drilling * | Depth: 150 m | Diameter: 200 mm |
| Down-the-hole hammer drilling * | Depth: 100 m | Diameter: 155 mm |
| Dry drilling * | Depth: 35 m | Diameter: 219 mm |
| Hollow stem auger procedure * | Depth: 15 m | Diameter: 180 mm |
TECHNICAl SPECIFICATIONS
| Drive unit (Deutz engine) | 4 cyl. / 55 kW / 75 HP diesel (emission level 5) |
| Tank capacity | 45 l |
| ADLER-Crawler Undercarriage F 75 | Width: 1,300 mm – 1,700 mm (telescopable) |
| Support feet | 4 x hydraulic |
| Drill pipes | 2 m |
| Travel range | 3 m |
| Feed | 15 kN |
| Retraction force | 50 kN |
| Mast lowering 1,000 mm | standard |
| Feed system | with hydraulic cylinder |
| Drill drive | hydraulically shiftable |
| Hydraulic drill head with transmission (2-speed), 4“ clearance Transmission (3-speed), electrically switchable | 1st gear: 490 daNm / 40 rpm 2nd gear: 254 daNm / 80 rpm 3rd gear: 123 daNm / 160 rpm Other speeds and torques possible |
| Suction pump | 160 m3/h, clearance 4“ |
| Piping turntable (Clearance / Lifting force / Lift) | up to Ø 335 mm / 220 daNm / 500 mm |
| Lift clamp (passage / Lifting force / stroke) | up to Ø 219 mm / 120 kN / 200 mm |
| Cable-crushing-lifting clamp/ Clamping force / stroke / lifting force / torque | up to Ø 219 mm 118 kN / 250 mm / 120 kN / 10.6 kNm |
| Offset drilling | optional |
| Winch hydraulic (traction / Rope length / Ø rope) | 36 kN / 35 m / 12 mm |
| Mastverlängerung | optional |
| Cable remote control for travel drive | standard |
| Cable remote control for driving and drilling | optional |
| Transport dimensions L / W / H | 6,023 / 1,300 / 2,733 mm (including protective device) |
| Weight of basic machine | from 6,5 t |
Drill rig B 75 geo pro
Get more information
Are you interested in the ADLER drill rig B 75 geo pro? Please fill in the form and let us or one of our sales partners provide you with more information!
Weitere Produkte
- Crawler Undercarriage F-Series
Crawler Undercarriage F-Series
With the ADLER Crawler Undercarriage F-Series, you can access hard-to-reach places such as backyards and fenced gardens, even in difficult terrain.
- Drill rig B 15
Drill rig B 15
Compact drilling rig for near-surface depths, light to medium-heavy soils. Optionally with integrated flushing pump as a well drilling device.
- Augers E-Series
Augers E-Series
E-Series – the auger range for every carrier vehicle. Powerful performance on light or medium soils. Get our heavy duty blades and heads for heavy soils.
Reinforced support feet, full power –
with the B 75 pro drill rig, you can drill down to a depth of 150 m!
Our drill rigs are used for well drilling, geothermal drilling and geological exploration drilling. We can also provide you with solutions for almost all types of piling mode. The low weight and compact design enable you to reduce your investment costs to a minimum. Our technology is innovative, allowing you to achieve excellent performance with minimal effort. We can equip our B-series drill rigs with customised features to meet your requirements.
The powerful B-series compact Drill Rigs allow you to make drill holes even in locations which are difficult to access. With a transport width between 80 and 95 cm and a height of just 195 cm, these Drill Rigs will fit through standard doors, enabling you to access any building. The standard chain chassis ensures that you reach your drilling location even on difficult terrain. Our small and compact Drill Rigs also ensure that you can travel to the site easily right from the start: All you need is a car trailer to transport them to the site.
Save Time! Quickly transported, short set-up times, Start work without delay Reduce costs! Maximum price-performance, low investment costs, easy maintenance Impress customers! Gentle on gardens, fits through standards doors
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Downloads
Advantages
- Powerhouse with 75 diesel hp and Deutz engine of the latest emission level 5
- Extremely high retraction force of 5 t due to extra strong mast design
- Larger undercarriage and reinforced support legs
- Feed system via lifting cylinder
- Extensive options such as mast lowering, mast inclination, offset drilling, etc.
- Down to 150 m
Application
- Well drilling
- Geothermal drilling
- Geological exploration drilling
Characteristics of B 75 pro
| Flush drilling | Depth: 150 m / Diameter: 200 mm |
| Down-the-hole hammer drilling | Depth: 100 m / Diameter: 155 mm |
| Dry drilling | Depth: 30 m / Diameter: 219 mm |
| Hollow stem auger procedure | Depth: 35 m / Diameter: 205 mm |
| Subsoil assessment | yes |
| Probing for unexploded bombs | yes |
Technical specifications
| Drive unit (Deutz engine) | 4 Zyl. / 55 kW / 75 Hp diesel (Stage 5) |
|---|---|
| Tank capacity | 45 l |
| ADLER-Crawler Undercarriage F 35 | Width: 835 mm – 1.235 mm (telescopable) |
| Support feet | 4 x hydraulic |
| Drill pipes | 2 m |
| Feed length | 2,3 m |
| Feed | 15 kN |
| Retraction force | 50 kN |
| Mast lowering 300 mm | yes |
| 2D-mast tilt by 5° forward and laterally | yes |
| Feedsystem | with hydraulic cylinder |
| Hydraulic drill head with side flush head passage | ABK 800: 200 daNm / 80 rpm 2 1/2″ |
| Drill drive | Mechanically swivelling (optionally hydraulic) |
| Hydraulic drill head with transmission (2-speed) clearance 2 1/2“ | 1st gear (slow): 440 daNm / 50 U/min 2nd gear (fast): 220 daNm / 100 U/min Other speeds and torques possible |
| Mud pump | 120 m3/h – 8 bar |
| Lift clamp passage / Lifting force / stroke | up to Ø 219 mm / 120 kN / 200 mm |
| Cable-crushing-lifting clamp/ Clamping force / stroke / lifting force / torque | up to Ø 219 mm 118 kN / 250 mm / 120 kN / 10,6 kNm |
| Offset drilling | optional |
| Winch hydraulic: traction / Rope length / Ø rope | 5 kN / 30 m / 6 mm (optional 10 kN / 75 m / 7 mm) |
| Mast extension | optional |
| Cable remote control for travel drive | yes |
| Cable remote control for driving and drilling | optional |
| Transport dimensions L / B / H | 4.950 / 880 / 2.575 mm (without protective device) |
| Weight of basic machine | up to 3,5 t |
Drill rig B 75 pro
Get more information
Are you interested in this product? Please fill in the form and let us or one of our sales partners provide you with more information!
Related products
- Crawler Undercarriage F-Series
Crawler Undercarriage F-Series
With the ADLER Crawler Undercarriage F-Series, you can access hard-to-reach places such as backyards and fenced gardens, even in difficult terrain.
- Drill rig B 75
Drill rig B 75
Powerful yet extremely compact drilling rig for difficult tasks in confined spaces. Ideal for all types of drilling up to 125 m depth.
- Augers E-Series
Augers E-Series
E-Series – the auger range for every carrier vehicle. Powerful performance on light or medium soils. Get our heavy duty blades and heads for heavy soils.