Turn your excavator from 2.0 to 30 t into a drilling rig

ADLER ABL mounted drill carriage

The B-series drill rigs are characterized by a wide range of accessories and attachments. The ADLER attachment drilling carriage (ABL) was specially designed for attachment to the excavator and quickly and easily transforms it into a cost-effective and powerful drilling rig.

Manufacturing according to the modular principle enables us to produce a customized drilling rig from a basic unit and the various add-on modules. Depending on the local conditions and drilling requirements, we can configure the optimum solution for our customers.

This guarantees a high degree of flexibility and a wide range of possible applications with individual production and high cost-effectiveness, making the drill rig attachment the ideal solution and your excavator a powerful, cost-effective drilling rig.

Related products

The “powerhouse” among the ADLER drilling machines

Drilling rig B 200 up to 250 m depth

The compact ADLER B 200 drill rig impresses with its economical, powerful six-cylinder, 6.1 liter Deutz engine and an operating weight of 13 t.
The drill rig is designed for demanding applications at greater depths.
Whether geothermal drilling, well drilling or geological exploration – the B 200 offers maximum performance and efficiency on any terrain.

Thanks to a wide range of accessories and extensions, the ADLER B 200 can be perfectly adapted to your specific requirements, increasing flexibility and productivity.

Downloads

Advantages

• powerful 13 t drilling rig ideal for geothermal drilling, well drilling, geological exploratory drilling and much more
• Double-headed drilling drive with torques of up to 23,000 Nm for simultaneous sinking of drill pipe and protective casing
• Retrieval force 122.5 kN / drill rods 4 m or 2 x 2 m
• With 800 mm mast lowering as standard
• Simple handling via the remote control for complete driving and drilling operation
• Optional accessories such as 15.1 kVA power generator, high-pressure cleaner and much more.

Application

• Well drilling
• Geothermal well drilling
• Geological exploratory drilling and much more

Technical specifications

Related products

Downloads

Advantages

• Compact and universally usable 5.5 t drill rig – ideal for geological exploratory drilling (including exploring of hollow spaces), anchor drilling and many other applications
• The rig enables drilling in various orientations. Thanks to the wide range of pivoting, tilting and lifting functions of the kinematics, almost any drilling point can be reached – avoiding the need to reposition the rig. Ground contact of the support legs is monitored by sensors to ensure stability.
• Drilling and percussive heads can be selected to suit the specific drilling method
• Simple handling via remote control for complete driving and drilling operations
• Digital angle display on the remote control plus three manual angle indicators on the drill mast
• Optional accessories such as powerful generators (4.1 kVA), high-pressure cleaners and more

Application

• Site investigation
• Geotechnical surveys
• Unexploded ordnance detection
• Flush drilling / Down-the-hole hammer drilling
• Dry drilling
• Hollow stem auger drilling

Technical specifications

Weitere Produkte

Excellent for dry drilling with piping turntable

Drill rig B 75 geo pro

This powerful, compact 8 ton machine is ideal for dry drilling with piping turntable. The quick changeover from dry drilling with a casing rotary table to suction drilling or flush drilling makes it flexible at the same time. Using the suction drilling method, it reaches a depth of 30 m with a diameter of up to 600 mm.

Let us know what you intend to do with our drilling rigs. We will provide you with the right device with specially designed equipment. Get in touch with us and we will make you an individual offer!

Downloads

Application

• dry drilling
• suction drilling
• flush drilling

Advantages

• powerful, compact 8 t machine
• fast conversion from dry drilling with piping turntable to suction drilling or flush drilling
• excellent for dry drilling with piping turntable up to 324 mm diameter
• suction drilling up to 600 mm possible

Characteristics of B 75 geo pro

TECHNICAl SPECIFICATIONS

Weitere Produkte

Reinforced support legs, full power –

Drilling rig B 75 pro up to 150 m depth

Ideal for well drilling, geological exploration and dry drilling. The extremely high retraction force of 5 t, the extra strong mast design and the feed system via lifting cylinders make it possible. In addition, the B 75 pro drill rig has a powerful water pump with an output of 120 m3/h at 5 bar.
This means that the most powerful ADLER compact drill rig can drill even deeper. Thanks to its reinforced support legs, the B 75 pro can be used to drill holes up to 150 m deep. An enormous depth, especially when it comes to drilling in the smallest of spaces. Such drilling depths would otherwise require heavy equipment.

With a transport width of 88 cm and a height of just 257 cm, you remain flexible. This is also ensured by the standard crawler chassis, which reliably transports the drill to the job site – even on difficult surfaces.

With this professional drill rig, you can drill wells, geothermal boreholes and geological exploration boreholes to great depths. Despite its enormous robustness and high retraction force, the B 75 pro is extremely light and compact. Units such as the drive unit, the crawler tracks and the powerful mud pumps are integrated. Even difficult drilling projects can be carried out particularly economically with the B 75 pro compact drilling rig thanks to reduced investment and set-up costs. Let us know your requirements and we will supply you with the B75 pro with the right equipment and a coherent overall concept. Request your individual offer now!

Downloads

Advantages

• Powerhouse with 75 diesel horsepower and Deutz engine with the latest emission level 5
• Extremely high retraction force of 5 t due to extra strong mast design
• Larger chassis and reinforced support legs
• Feed system via lifting cylinder
• With mast lowering and 2-D mast tilt as standard
• Up to 150 m depth

Application

• Well drilling
• Geothermal well drilling
• Geological exploratory drilling

Profile B 75 pro

Technical specifications

Related products

Powerful, configurable drilling rig for well drilling,

Geothermal drilling and dry drilling to a depth of 125 m

A 75 diesel horsepower and Deutz engine with the latest emission level 5 makes this extremely compact drilling rig so powerful: With the Adler B 75 well drilling rig, you can really go deep: Drilling up to 125 m is possible! Even if the area available for well drilling is extremely limited.

Powerfully drills into the depths in the tightest of spaces

Wherever there is access with a width of 88 cm and a height of 220 cm, you can drill your well or geothermal borehole in the tightest of spaces. With the ADLER B 75 well drill, the crawler tracks ensure safe transportation of the well drilling rig to the site – even in difficult ground conditions.

What applications is the ADLER B 75 drill bit suitable for?

You can use the B 75 well drill to drill deep wells, to drill geothermal wells for the use of geothermal energy or to drill geological exploration wells. The B 75 is a powerful drilling rig that is also particularly effective due to its low weight and compactness: In addition, hardly any other supplier can drill to such depths in the smallest of spaces – a clear competitive advantage for you as a well driller or geothermal drill!

Profile B 75

Technical specifications

How deep can wells be drilled without a permit?

You can’t do it without a permit: every fountain must be registered!

If you intend to drill a well shaft for the purpose of obtaining service and drinking water, you must register and report this to your local authority, the city, the district office or the lower water authority for a fee. This also applies if you wish to drill a simple well purely for garden irrigation – a so-called percussion or rammed well. In most towns and cities, these wells are free of charge and drilling them is generally permitted under Section 46 of the Federal Water Act (WHG). However, if the drilling of a well leads to a lowering of the groundwater level or if the water quantity and pumping capacity of the neighbor’s well is reduced, this can lead to a neighbor dispute. To avoid trouble, the Verband Wohneigentum NRW e.V. recommends consulting with your immediate neighbors before drilling a well.

How deep do you have to drill a well?

As you naturally have to drill down to the groundwater for your water supply, the required well depth depends on the depth of the groundwater table. For private wells, it can often be sufficient to drill the borehole between 6 meters and 10 meters deep. However, depending on the depth of the groundwater in your garden, the required drilling depth can also be considerably greater: From a depth of around 8 meters, a well is referred to as a deep well.

How deep does a geothermal borehole have to be?

In order to use geothermal energy, it is usually necessary to drill much deeper. The exact depth of the geothermal borehole depends on the heating load of the building and the nature of the ground. Softer ground can be drilled deeper than rock layers. Instead of one very deep geothermal borehole, you can also opt for two less deep ones. As a rule, the drilling depth is around 70 meters. In exceptional cases, a drilling depth of more than 100 meters is required. In this case, however, an additional permit from the mining authority is required. With the B 75 drilling rig, you can reach depths of up to 125 meters.

Simply send us an inquiry

As a well drilling rig manufacturer, we naturally offer you the right equipment for almost all special requirements. Simply get in touch with us. We will put together your configurable drilling rig, make you an individual price offer and develop a coherent overall concept.

Related products

The ideal drill with a clearly arranged control unit for

Geological exploratory drillings and subsoil investigations

Professional machine for easy transportation on a 3.5 t trailer. Powerful for many areas of application with extensive options. Ideal for well construction, geothermal drilling and geological exploration drilling up to 100 m deep.

A powerful machine for a wide range of applications with extensive options. With the B 50 powerhouse, you can drill up to 100 m deep. Everywhere. This machine is also the ideal solution in small gardens, in confined areas or where access is narrow and limited. Also for subsoil exploration.

All you need is a door, gate or wall opening that is 95 cm wide and 205 cm high. Hardly any other drill combines so much power in such a small space. The complete B series also has robust crawler tracks. This ensures that even slippery, uneven or soft floors pose no problem for your work.

The B 50 drilling rig is ideal for well drilling in densely built-up areas. However, geothermal drilling and geological exploration drilling are also becoming increasingly important. In addition to the already mentioned crawler chassis, the powerful flushing pump and an integrated remote control ensure convenient handling thanks to the clearly arranged control unit. Its low weight and compact design make the B 50 drill rig particularly economical to use. In addition, we offer you the right equipment for every application – exactly as you need it. More flexibility. More possibilities. Ask us for your individual offer now!

Profile B 50

Technical specifications

Related products

Compact, versatile pile-driving tool – ideal for confined spaces

Drill rig B 25 Pile driver

This compact, versatile pile driver is ideal for tight spaces. It is characterized by a high ramming performance of up to 500 kg with a low operating weight. On the all-terrain, telescopic ADLER crawler chassis, the post driver can reach its place of use safely, even on difficult terrain, and ram steel posts or micro-posts with a diameter of up to 270 mm into the ground quickly and reliably.

Like all our drilling rigs, our pile driver is very powerful and at the same time so light and compact that you save a lot of effort, time and money when it comes to set-up costs. That increases your profit. Tell us what you plan to do. We will provide you with the right device with the specially designed equipment. Get in touch with us and we will make you an individual offer!

Downloads

Application

• Compact, versatile pile-driving tool – ideal for confined spaces

Advantages

• Compact, versatile pile-driving tool – ideal for confined spaces
• Low operating weight – high driving performance with up to 500 kg
• For steel- or micropiles up to 270 mm
• Mast tilt to the front 10°
• Telescopic mast extension, 1 m (hydraulic)
• Pullmaster PL 5 with a winch capacity

TECHNICAL SPECIFICATIONS

Related products

Earthing up to 35 m possible depending on ground conditions

Drill rig B 25 Lightning conductor

Impact device for earth rods with a diameter of 16 – 19 mm. The self-propelled machine makes groundings of up to 35 m possible, depending on the soil conditions – even in difficult terrain.

The mast is hydraulically adjustable in three directions (3D). The radio remote control for the hydraulic impact hammer (up / down and on / off) has an endless impact device via limit switches. The drive forwards and backwards can also be remotely controlled by radio.

TECHNICAL SPECIFICATIONS

Related products

Enables drilling in places where combustion engines are not permitted

Drill rig B 25 Electric

Our all-round drilling rig for well drilling, geological investigations and ground investigations up to a depth of 50 m, now with electric drive. Without a combustion engine, there are no fine dust emissions, so the device is also suitable for drilling in buildings and interiors. You also benefit from lower noise emissions and maintenance costs.

Drilling methods and areas of application

TECHNICAL SPECIFICATIONS

Weitere Produkte